Know More About Infrared Heating

Infrared Heating Panels FAQs

What is Infrared?

Infrared or IR (for short) is a form of electromagnetic radiation with a lower frequency than visible light.

How do Infrared Heating Panels work?

Traditional heating drys out our environment and the loss of heat through the cooling of the air in the room means a requirement for constant burning of fuel to maintain the comfort of those occupying the room.
Using harmless, clean, healthy and incredibly economical electromagnetic waves, that lie just under the visible range of light; Infrared Radiant Heat Panels cleanly and greenly bring us instant, controllable heat at a fraction of the cost of traditional, inefficient and dirty fossil fuel based heating systems.

Are Infrared Heaters Really Green?

You bet. Just think about how inefficient traditional heating systems are. Traditional oil or gas fired boilers operate by simply burning precious natural resources that have been mined out of the earth. Your boiler then heats water that is pumped around your home into the radiators, which in turn only heat the air around them. This air rises and the heat is lost. It’s hard to imagine a system of heating that is less efficient and less friendly to the environment. But until now that’s the best we had.
Carbon Infrared heating panels change all of that. They work in the same way as the greatest natural heater of all: the Sun. Using their natural and energy efficient radiant technology ensures that the rampant inefficiencies associated with traditional and outmoded heating systems are a thing of the past.
Of course, that’s good for the planet and your pocket.

I know the energy costs of Infrared Heaters are a fraction of traditional heating systems but what about maintenance costs?

Its more good news here. Traditional heating systems require a costly annual boiler service check to be carried out by a Registered Gas Installer. Because of their moving parts and the fact they are burning harmful carbon emitting fossil fuels they are also very prone to breakdown.
Your infrared heat panels require NO ANNUAL SERVICING.
They are not just cheaper to buy, install and run they are also cheaper to own.

Is Infrared Heating dangerous?

No. Infrared heat is completely safe. There is an incorrect belief that all types of radiation are dangerous. For example sunlight is one of the most common forms of radiation. The only danger from Infrared heat is the same as for any type of heating – don’t stand too close! Ecoway’s infrared heaters are mounted at a minimal height of 120cms to try and prevent any heat related accidents. Not all other heaters adhere to the same guidelines.
In many ways Infrared heat is less dangerous for you than other heating systems. With many traditional heaters air circulates, stirring up dust particles which can affect allergy sufferers. They can also be noisy and sometimes a little smelly! They can also cause condensation and damp. Because infrared heat acts directly, condensation is not an issue and dust particles are not disturbed. Ecoway’s infrared heaters are also noise and odour free.

Where can I use Infrared Heating Panels?

Anywhere. Home, Office, Retail store, factory, Commercial, government, hospitals,etc, Any type of building will benefit from the installation of Carbon Infrared Panel Heater.
Think about it: traditional heating systems are installed in any and all environments we encounter on a daily basis.
Infrared Heat Panels can be installed in any environment that heating is required and, what’s more, in 100% of cases the environment of the heated space is improved from a heat output, environmental, energy efficiency, cost effectiveness and health perspective.

Do I have flexibility on where I can place the panels in my rooms?

Absolutely. The wonderful thing about Infrared heat panels compared to traditional radiators is that they are almost completely unobtrusive.

Firstly the attractive flat white panels have a much sleeker profile than old traditional radiators so you won’t notice they are there.

Secondly you can mount them on your walls or your ceilings – you decide what suits you best.

Because infrared heat panels are bracket mounted its no more complicated than fixing a flat screen TV to your wall or ceiling.

How will I save money with Infrared Heat Panels?

Simple. Infrared heat panels can be up to 70% more cost effective than traditional central heating systems.

What about installation, will this be expensive?

No! Your installation costs will be literally a fraction of cost of installing a traditional radiator in your home. There is no boiler, no flue, no chimney, no pipes, no plumbing, no digging, no cutting, no complicated building works whatsoever. Because infrared heat panels are run with electricity installing a heat panel is as simple as fitting a new light fitting or putting in a socket.

Which EcoArt panel is right for me?

It really depends on your tastes and budget. There’s a wide range of models and styles available. Browse all infrared heaters now. If there’s too much choice for you to handle, please get in touch and we’ll see if we can help.

How do the EcoArt thermostats work?

Wirelessly and intelligently. Powered via one aa sized battery, the thermostats have a large liquid crystal display with a backlight option. Simple or enhanced functionality enabling the choice of controlling just like a standard thermostat, or numerous different heating options for time / day scheduling. Simple on / off temperature regulation, or pid thermostatic control may be used. Each thermostat is capable of controlling up to ten heating panels, meaning that you can efficiently zone the space you want to heat in small or larger zones. Ultimate flexibility.

What about peace of mind – Do I get a warranty?

You certainly do – AND a lot more besides.
Infrared Heat Panels come with a standard 5 year manufacturers warranty. Not only that but they have undergone the worlds most stringent set of quality assurance tests and have attained the highest TÜV SÜD Certification, CE Certification and are RoHS Compliant.

Do you test every panel that leaves the production facility extensively?

Yes, we produce our panels according to the “Quality at the source” concept; every panel is tested. We guarantee the quality of our product.

How do I clean my heating panel?

During the cleaning process, always clean the heating panel while at room temperature. Remove the power cord from the electrical outlet. Wipe with a damp cloth or use a glass cleaner, being sure not to allow moisture to drip into the panel.

Become Interested in EcoArt Heating

Thank you for your interest in EcoArt Heating and our excellent heating products. You are one step closer to experiencing the best radiant heating with many benefits.